atlantahousepaintingservices.com

Before You Call the Air Conditioning Repair Shop

by

Businesslocallistings

You don’t have to panic every time the AC breaks down, especially during the summer. Calling your Tampa air conditioner repair people is actually not the first thing to do. So here are four ways to try and revive your AC when it stops working.

Clean the filters. One of the top reasons for air conditioning breakdowns is clogged filters. AC repair shops often get units that have stopped giving off cool air simply because the filters haven’t been cleaned since it was installed. Air conditioning repair fees can get expensive, especially for industrial sized units. Save money by unclogging filters at least once a month.

Check the compressor. Most AC repairs have to do with the unit’s compressor so when your air conditioner suddenly stops working, this is the part you should check first. If your compressor fails, your whole air conditioning system will fail. Check around the compressor for any signs of damage or wear and tear. Listen to the compressor for any irregular noises. Look around the compressor for frost build-up too. If you notice any of these things, it may be a sign of a more serious problem. This is the time you should call your air conditioning repair shop in Tampa.

You’re compressor might need extra care If you live in a relatively cold, wet, or high altitude area. The efficiency of air compression depends on air temperature, atmospheric pressure and relative humidity. The rating of an air compressor therefore depends on ambient conditions. AC repair would probably be more needed, given these conditions. You might also need to regularly oil the compressor. Oil is used to lubricate the piston as it moves inside the cylinder. If there is an oil leak within the compressor, further damage may happen in other parts of the unit.

Check the controller. Since the controller gets handled a lot, some degree of damage can come from mishandling this part. AC repair or troubleshooting can starts with the controllers. HVAC systems have different settings for cooling and heating, and your air conditioner will not function if the wrong setting is set. If you’re unit still doesn’t work after you’ve taken a look at the controller, try asking your Tampa air conditioning repair shop to set it for you.

If all else fails, reset the unit. This is a very simple and fast way to troubleshoot your AC unit. Go to the meter box and turn off the switch. Some compressors may also have an external isolator switch which should also be turned off. Keep both of these switches in the off position for a few minutes before restarting. Although this it’s a simple thing to try, it often works and may well bring your air conditioner back to life. You can save yourself and the AC repair shop a lot of trouble just by this re-setting.

Check Freon levels. This is not really a job for the inexperienced so for this part, ask your air conditioning repair vendor for help. An air conditioner contains a set of small pipes that hold Freon. As warm air that comes through the return vent blows across these pipes, the heat from the air is transferred into the liquid refrigerant, which causes it to boil. As it boils it changes into a gas. A basic law of physics is that when a liquid boils and changes into a gas, the gas takes the heat with it. When your Freon levels are too low, cool air will fail to be produced. The AC repair shop can do this for you immediately, just like Ken Barret Air Conditioning Repairs. The serve areas of Tampa, Carrollwood, Lutz, Temple Terrace, and Hillsborough. They also provide commercial refrigerator repair.

Ken Barrett Air Conditioning 13909 Cherry Brook Lane Tampa, FL 33618 Phone: (813) 968-5535 Email: kb@kenbarrettair.com Website: http://www.kenbarrettair.com

Article Source:

ArticleRich.com